AeroPress Preparation Guide

Background

Because it was conceived just 38.5 miles from our Oakland roastery by Aerobie (those wonderful folks who created an improbably long-flying disc), we’d like to humbly assert that the AeroPress is our first locally-produced piece of merchandise. It’s a peculiar and lovely device – easily the most durable and portable option for brewing quality coffee. It produces a cup that’s thick and focused, but still quite nuanced.

Step 1

Bring to a boil enough water for both the AeroPress and your brew vessel. 400 grams ought to do it.

Step 2

Insert a paper filter into the AeroPress’s detachable plastic cap.

Step 3

Weigh out 15 grams of coffee.

Step 4

Grind your coffee. AeroPress calls for a fine grind – just a bit more so than drip coffee.

Step 5

Assemble your AeroPress. Make sure the entire assembly is dry, since any residual moisture can compromise the device’s seal.

Step 6

Place it on your scale with the flared end up, then tare the weight. The numbers should appear upside-down. It’s possible to attach the black filter cap and place it right side-up, but this tends to cause leakage and make accurate brewing slightly more difficult.

Step 7

Add your ground coffee. Be careful not to spill any grounds into the ring-shaped gutter at the top of the AeroPress, as this can make attaching the cap a challenge later on.

Step 8

Add twice the weight of water to your amount of grounds. For example, if you’ve got 15 grams of coffee, add 30 grams of water. Your water ought to be about 200 F.

Step 9

Gently immerse the grounds with a bamboo paddle or butter knife. The goal here is not to stir them so much as it is to guarantee even saturation. Let this sit for 30 seconds.

Step 10

Add another 160 grams of water and let sit for one minute.

Step 11

Use the remainder of your water (it should be about 200 grams) to wet your filter and cap. The water will serve a dual function here: It will both help the filter adhere to the cap, and it will heat your brewing vessel.

Step 12

After a minute has elapsed, give your grounds 10 vigorous stirs.

Step 13

Screw the cap onto the AeroPress. You’re in very close proximity to seriously hot coffee here, so please be careful.

Step 14

Flip the whole assembly over with haste and control and purpose. All three. Position it atop your brew vessel and begin applying downward pressure. You ought to experience about 30 pounds of resistance here. If the pushing feels too easy, your grind is likely too coarse; if it’s very hard to push, chances are the grind is a bit too fine. Your coffee’s fully brewed once it begins to make a hissing sound. This means there’s no more water to push through the device.

Step 15

Now here’s the really satisfying part, for two reasons. Once you’ve unscrewed the cap, you can pop out the filter and the puck of condensed grounds by simply pushing the AeroPress’s interior section a final inch.

Enjoy!

Then, of course, you can pour your coffee and enjoy. And please do enjoy.

guide aeropress

What You’ll Need:

AeroPress
Coffee
Grinder
Kettle
Scale
Timer
Wooden Spoon

Brew Time

2 – 3 Mins